Add Webee stuff

src/main.rs

@@ -1,27 +1,123 @@
 #![no_std]
 #![no_main]
 
+mod webee;
+use webee::{Webee, Vector};
+
+use arduino_hal::Peripherals;
+use arduino_hal::prelude::*;
 use panic_halt as _;
 
+
 #[arduino_hal::entry]
 fn main() -> ! {
-    let dp = arduino_hal::Peripherals::take().unwrap();
+    let dp = Peripherals::take().unwrap();
     let pins = arduino_hal::pins!(dp);
+    let status = pins.d13.into_output();
+    let mut serial = arduino_hal::default_serial!(dp, pins, 57600);
+    let rx = pins.d2;
 
-    /*
-     * For examples (and inspiration), head to
-     *
-     *     https://github.com/Rahix/avr-hal/tree/main/examples
-     *
-     * NOTE: Not all examples were ported to all boards!  There is a good chance though, that code
-     * for a different board can be adapted for yours.  The Arduino Uno currently has the most
-     * examples available.
-     */
+    let mut test = Webee::new(
+        dp.USART1,
+        pins.d19,
+        pins.d18.into_output()
+    );
 
-    let mut led = pins.d13.into_output();
+    // let mut webee = Usart::new(
+    //     dp.USART1,
+    //     pins.d19,
+    //     pins.d18.into_output(),
+    //     38400.into_baudrate(),
+    // );
+
+    // ufmt::uwriteln!(&mut serial, "Hello, World!").void_unwrap();
+    // ufmt::uwriteln!(&mut serial, "RX ready: {}", rx.is_high()).void_unwrap();
+    // delay_ms(1000);
+    // ufmt::uwriteln!(&mut serial, "RX ready: {}", rx.is_high()).void_unwrap();
+
+    // let webee = Webee::new(dp.USART1, pins.d19, pins.d18);
+
+
+    // let mut test = webee.write(0xFF);
+    // while let Err(_) = test {
+    //     test = webee.write(0xFF);
+    //     ufmt::uwriteln!(&mut serial, "initializing..").void_unwrap();
+    //     delay_ms(500);
+    // }
+    ufmt::uwriteln!(&mut serial, "Webee initialized!").void_unwrap();
+    // delay_ms(1000);
+
+    // let mut init = true;
+    // while init {
+    //     match webee.write(0) {
+    //         Ok(_) => {
+    //             webee.flush();
+    //             ufmt::uwriteln!(&mut serial, "Webee initialized!").void_unwrap();
+    //             init = false;
+    //         }
+    //         Err(_) => {
+    //             ufmt::uwriteln!(&mut serial, "initializing..").void_unwrap();
+    //             delay_ms(500);
+    //         }
+    //     }
+    // }
+
+    // ufmt::uwriteln!(&mut serial, "RX ready: {}", rx.is_high()).void_unwrap();
+    let role : Vector<u8> = test.send(vector!([0x5a, 0xaa, 0xb1]));
+    ufmt::uwriteln!(&mut serial, "Role: {}", role);
+
+    // for byte in [0x5a, 0xaa, 0xb1].iter() {
+    //     webee.write_byte(*byte);
+    //     ufmt::uwriteln!(&mut serial, "Wrote byte: {:X}", *byte).void_unwrap();
+    // }
+    //
+    // ufmt::uwrite!(&mut serial, "Role:").void_unwrap();
+    // let mut result: u8 = webee.read_byte();
+    //
+    // while result != 0xFF {
+    //     ufmt::uwrite!(&mut serial, " {:02X}", result).void_unwrap();
+    //     result = webee.read_byte();
+    // }
 
     loop {
-        led.toggle();
-        arduino_hal::delay_ms(1000);
+        let b = nb::block!(serial.read()).void_unwrap();
+
+        ufmt::uwriteln!(&mut serial, "Got {:X}!", b).void_unwrap();
     }
 }
+
+// fn readBytesUntil()
+
+// struct Webee<USART, RX, TX> {
+//     serial: Usart<USART, RX, TX>,
+// }
+//
+// impl<USART, RX, TX> Webee<USART, RX, TX> {
+//     pub fn new(usart: USART, rx: RX, tx: TX) -> Self {
+//         Webee {
+//             serial: crate::Usart::new(usart, rx, tx, Baudrate::new(38400)),
+//         }
+//     }
+// }
+
+
+// struct Webee<'a> {
+//     serial: &'a usart
+// }
+//
+// impl Webee {
+//     fn new(serial: usart) -> Self {
+//         Self {
+//             serial
+//         }
+//     }
+//
+//     fn send_cmd(&mut self, cmd: u8) -> ! {
+//         let frame: [u8; 3] = [0x55, 0xAA, cmd];
+//         self.serial.write(&frame)
+//     }
+//
+//     fn recv(&mut self) -> ! {
+//         self.serial.read()
+//     }
+// }